Loading...

HDPE T-LOCK GEOMEMBRAN

"Based on success and continuity, honesty, trust and quality."
  • Slider Image
  • Slider Image
  • Slider Image

HDPE T-LOCK GEOMEMBRANE

It is made of HDPE. The unique feature that differentiate Geoser T-LOCK geomembrane is the continous T shape tabs on the surface. With these tabs, T-LOCK Geomembrane does not move in the concrete and prevents damages against concrete by blocking vibrations. Thus, the constructions shall be healtihier and more long-lived.

• Concrete pipes
• Irrigation canals
• Roofs
• Building foundations
• Tunnels
• Collector pipes
• Dams
• Waste sites

• The only difference between the T-Lock Geomembrane and the other Geomembrane are quotes. T-Lock Geomembrane can not act in concrete through these quotes, It prevents damage to the concrete from vibration.
• Highly resistance against chemicals.
• UV resistant.
• Higher tensile strength.
• Low permeability.

• Profoundly resistant to the fractures and cracks.
• Superior protection against leakages.
• Resistant against natural condition.
• Highly resistant to organic and inorganic solvents.
• It is easily applied to any kind of ground.
• Optionally it can be reinforced geotextiles.
• Recycled and can be used again.

It is combined with Fusion welding system (double-stitched hollow welding test), spreaded by leaving 6-10 cm ride share with free spreading technique. Fixed with pressure profiles in place finish.

TECHNICAL DATA SHEET
  Name of Product   HDPE T-Lock
  Product Content   High Density Polyethylene
  Width-Length   Between 2,2-7 m -Desired height and dimensions
  Thickness   Between 1-3 mm
  Packing   In nylon packing-Tracked
  Color   Black (Desired colors)
  Standart No   TS EN 13967-13361-13362-13491-13492-13493

HDPE T-LOCK MECHNICAL AND CHEMICAL PROPERTIES

Features
Standard
Requirement
Geoser Result
Visible Defects (Cracks, scratches, tears, deformation) TS EN 1850-2 2 Shouldn’t be visible defects There are no visible defects.
Length TS EN 1848-2 Should be between registered tolerances Registered values
Width TS EN 1848-2 Should be between registered tolerances Registered values
Thickness TS EN 1849-2 Should be between registered tolerances Registered values
Mass per unit area TS EN 1849-2 Should be between registered tolerances Registered values
Density (g /cm3) TS 1320 Between 0,91-1,05 0.94
Waterproofing (0,15 ar asınç !ltında) EN 14150 Must be waterproof Waterproof
Tensile Strength (N/mm2), Min. EN ISO 527 Min. 26 N 27
Elongation Rate at Break (%), Min. EN ISO 527 Min. %700 710
Resistance to Weather Conditions (%) EN 12224 Between 1-10 4%
Resistance to Oxidation (%) EN 14575 Max. %5 2%
Gas Tightness ASTM D 1434 NPD NPD
Tear Strength (kN/m) ISO 34-1 Between 166-220 190
Resistance Against Hot and Cold (Waiting 10 min. At 80 ° and -30 °) DIN 53361 No cracks and tears There is no tearing and cracking.
Combustion Class TS EN 13501 Classification Class E
Flexibility in the cold EN 495-5 No break and crack There is no breaking or cracking.